Home Archived For November 2021

Sunday, November 28, 2021

File Dump eMMC iNFINIX HOT 9

      3 comments   
Ketua Teknisi HP (Official)

File Dump eMMC iNFINIX HOT 9
File eMMC Infinix HOT 9


File Dump eMMC iNFINIX HOT 9.DIbeberapa situasi file dump ini dibutuhkan saat proses pergantian ic emmc pada smartphone yang menggunakan chip Mediatek..langsung saja diunduh jika memang diperlukan

Log Ufi Box:

VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DP6DAB (0x445036444142), rev: 0x03, serial number: 0x76CDCE16
Manufacturing date: May 2020
CID: 15010044 50364441 420376CD CE16571C
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1) 
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Authentication Key not yet programmed]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
crypto state: encrypted?

Friday, November 19, 2021

File Dump eMMC Redmi 7A Pine

      Comment   
Ketua Teknisi HP (Official)

File Dump eMMC Redmi 7A Pine
DUMP REDMI 7A



File Dump eMMC Redmi 7A Pine.Dibeberapa kondisi file dump ini dibutuhkan dalam proses pergantian ic emmc,meskipun banyak cara dengan methode pasangan kosongan.silahkan unduh filenya free...

Log Ufi Box

Connection status: EHCI:HUB:HUB[#4]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 
 Boot version: 1.03, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x5163B475
Manufacturing date: Jan 2019
CID: 90014A48 41473461 32A55163 B4751654
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1) 
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 95472]
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00

ANDROID System Info:
 platform: msm8937, cpu abi: armeabi-v7a
 manufacturer: Xiaomi
 board: QC_Reference_Phone, name: pine
 brand: Xiaomi, model: Redmi 7A
 build model list: Redmi 7A
 build id: PKQ1.190319.001, version: 9 [Pie] (ZQL1533-pine-build-20190805184733)
 build description: pine-user 9 PKQ1.190319.001 V10.2.5.0.PCMMIXM release-keys

Internal storage: 1.84 GiB
crypto state: unencrypted
eMMC selected: [HYNIX] H9TQ17ABJTACUR ID90/16GB  (BGA221)
Dump1
Dump2 (Alternatif)

File Dump eMMC Redmi Note 6 Pro (Tulip)

      Comment   
Ketua Teknisi HP (Official)

File Dump eMMC Redmi Note 6 Pro (Tulip)
File eMMC TULIP


File Dump eMMC Redmi Note 6 Pro (Tulip).Dibeberapa kondisi file dump ini dibutuhkan dalam proses pergantian ic emmc,meskipun banyak cara dengan methode pasangan kosongan.silahkan unduh filenya free...

Log Ufi Box

Connection status: EHCI:HUB:HUB[#4]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 
Boot version: 1.03, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x45 (SanDisk)
Product name: DA4064 (0x444134303634), rev: 0x01, serial number: 0x1318D53D
Manufacturing date: Aug 2018
CID: 45010044 41343036 34011318 D53D85A6
CSD: D00F0032 8F5903FF FFFFFFEF 8A404022
EXT_CSD revision: 1.8 (MMC v5.1) 
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Provisioned, counter: 132243]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 4 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00

ANDROID System Info:
 platform: sdm660, cpu abi: arm64-v8a
 manufacturer: Xiaomi
 board: sdm636, name: tulip
 brand: xiaomi, model: Redmi Note 6 Pro
 build model list: Redmi Note 6 Pro
 build id: PKQ1.180904.001, version: 9 [Pie] (PKQ1.180904.001)
 build description: tulip-user 9 PKQ1.180904.001 V12.0.1.0.PEKMIXM release-keys

crypto state: encrypted?
eMMC 5.x Health report:
 Device lifetime: Reserved
 Estimation of the device lifetime (SLC): Exceeded its maximum estimated device life time
 Estimation of the device lifetime (MLC): 10% - 20% device life time used
eMMC selected: [SanDisk] SDINBDA4-64G  (BGA153)

Vivo Y15 PD1901 Mati Total Akibat Jatuh-Done Tanpa Skema

      Comment   
Ketua Teknisi HP (Official)
Vivo Y15 PD1901 Mati Total Akibat Jatuh-Done Tanpa Skema
VIVO Y15 MATI TOTAL



VIvo Y15 Mati Total Akibat Jatuh-Done Tanpa Skema.Cara ini merupakan cara cepat analisa tanpa skema yaitu dengan cara menggunakan suntik tegangan,tentu sebelum melakukan eksekusi ketahui gendala dan permasalahan yang ada...
Dalam kasus ini smartphone mati total akibat jatuh dan keluhan pengguna anget saat dicas/charging...
Tanpa pikir panjang dan ini kasus umum yang sering terjadi,maka kami langsung melakukan teknik meraba,setelah kami dapati ada sedikit anget area yang berdekatan area Vbat/Batre tepatnya dibawah slot sim card..lihat gambar...
Vivo Y15 PD1901 Mati Total Akibat Jatuh-Done Tanpa Skema
VIVO Y15

Pada area ini sumber angetnya,maka kami langsung membuka penutup kaleng dan melakukan pengukuran(Fokus pada capasitor yang paling gede)...setelah kami analisa dengan beberapa methode pengukuran +/- terdapatlah C yang bermasalah...
Vivo Y15 PD1901 Mati Total Akibat Jatuh-Done Tanpa Skema
VIVO Y15

Berhubung C langsung menuju keground,maka kami tidak melakukan pergantian(Cabut Langsung On)...
Vivo Y15 PD1901 Mati Total Akibat Jatuh-Done Tanpa Skema
VIVO Y15
Hp hidup normal jaya tanpa gendala apapun...Untuk kasus yang sama silahkan menggunakan methode diatas.Sekian,Cara mengatasi Vivo Y15 PD1901 Mati total akibat jatuh.Selamat mencoba dan semoga sukses

Sunday, November 7, 2021

File Backupan Ufi Vivo Y15 PD1901BF-NORMAL

      Comment   
Ketua Teknisi HP (Official)

File Backupan Ufi Vivo Y15 PD1901BF-NORMAL
File Backupan ufi


File Backupan Ufi Vivo Y15 PD1901BF-NORMAL.File ini bisa digunakan untuk melakukan perbaikan pada smartphone yang mengalami masalah seperti Bootloop-Hang Logo-Mati Total-Sinyal dan Baseband bermasalah....file ini kami backup langsung dari smartphonenya dengan kondisi normal jaya...

Log

AUTH info: MTK, version: 1
BROM version[1]: 7.2045.2.0
DA: MTK_AllInOne_DA_VIVO.bin
hash: f5b40a757b95c0d4e4ab1a1fdbb2522750568e6c, size: 528.48 KiB
version: 3.3001.2018/03/22018/11/27 20:46:08, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port (COM6)
Connection status: EHCI:HUB:HUB[#1]:USB 1.10 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2016
Connecting Bootrom... 
Sending Download Agent... 
Platform: MT6765, hw ver: 0xCA00, sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
SRAM size: 256 KiB
DRAM size: 768 MiB
SOC ID: 6d42cbf8ffafe1775a732f85577acb65bf519f398de38d3cf56fb0508893e7bd
ME ID: 66064bb0bb73ff1e1b63d6254d045907
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: hC9aP3 (0x684339615033), rev: 0x01, serial number: 0x08A6BCC8
Manufacturing date: Aug 2019
CID: 90014A68 43396150 330108A6 BCC88677
Capacity: 58.27 GiB (62,562,238,464 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB (Provisioned)
User area: 58.24 GiB(62,537,072,640 bytes)
USB speed: High-Speed

platform: mt6765, cpu abi: arm64-v8a
manufacturer: vivo
board: k62v1_64_bsp, name: 1901
brand: vivo, model: vivo 1901 ()
build id: RP1A.200720.012, version: 11 [Android 11] (RP1A.200720.012 release-keys)
build date: Sat Aug 28 20:42:55 CST 2021, security patch: 2021-08-01
build description: full_k62v1_64_bsp-user 11 RP1A.200720.012 eng.compil.20210828.204646 release-keys

crypto state: encrypted

AUTH info: MTK, version: 1
BROM version[1]: 7.2045.2.0
 DA: MTK_AllInOne_DA_VIVO.bin
  hash: f5b40a757b95c0d4e4ab1a1fdbb2522750568e6c, size: 528.48 KiB
 version: 3.3001.2018/03/22018/11/27 20:46:08, start addr: 0x40000800
Connecting to BootROM...
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
 Hold the VOL UP to force MediaTek BootROM.
 Scanning BootROM or Preloader port... Done
 Detected [DA] MediaTek USB Port (COM6)
Connection status: EHCI:HUB:HUB[#1]:USB 1.10 High-Speed
 USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2016


platform: mt6765, cpu abi: arm64-v8a
manufacturer: vivo
board: k62v1_64_bsp, name: 1901
brand: vivo, model: vivo 1901 ()
build id: RP1A.200720.012, version: 11 [Android 11] (RP1A.200720.012 release-keys)
build date: Sat Aug 28 20:42:55 CST 2021, security patch: 2021-08-01
build description: full_k62v1_64_bsp-user 11 RP1A.200720.012 eng.compil.20210828.204646 release-keys

crypto state: encrypted

Reading preloader... Done
Reading pgpt... Done
Reading boot_para... Done
Reading recovery... Done
Reading para... Done
Reading expdb... Done
Reading frp... Done
Reading nvcfg... Done
Reading nvdata... Done
Reading backup... Done
Reading survival... Done
Reading reserved... Done
Reading cust... Done
Reading metadata... Done
Reading protect1... Done
Reading protect2... Done
Reading seccfg... Done
Reading persist... Done
Reading sec1... Done
Reading proinfo... Done
Reading efuse... Done
Reading md1img... Done
Reading spmfw... Done
Reading scp1... Done
Reading scp2... Done
Reading sspm_1... Done
Reading sspm_2... Done
Reading gz1... Done
Reading gz2... Done
Reading nvram... Done
Reading lk... Done
Reading lk2... Done
Reading boot... Done
Reading logo... Done
Reading dtbo... Done
Reading tee1... Done
Reading tee2... Done
Reading vendor... Done
Reading system... Done
Reading vbmeta... Done
Reading cache... Done
Reading otp... Done
Reading flashinfo... Done
Files saved to \\%BACKUPS%\Vivo\Y15\RP1A.200720.012%20release-keys\

Tuesday, November 2, 2021

Nvram-Nvdata Vivo Y91i-BAKCUP NORMAL

      Comment   
Ketua Teknisi HP (Official)

Nvram-Nvdata Vivo Y91i-BAKCUP NORMAL
NVRAM VIVO Y91I


Nvram-Nvdata Vivo Y91i-BAKCUP NORMAL.File ini kami backup menggunakan Universall Tool,seperti kita tau file nvram berfungsi untuk memperbaiki masalah seperti Baseband Unknown,Sinyal hilang dan permasalahan lain,jika berkenan silahkan unduh...


Log Adb:

Operation: Runing
Phone Mode: Adb Mode
UT-Sync Server: OK
Register: OK
Start Modul: OK
___________________________

Searching Device: OK
Gathering Phone Info: OK
Brand: vivo

Model: vivo 1820
Android Version: 8.1.0
Description: full_k62v1_64_bsp-user 8.1.0 O11019 1626347090 release-keys
Build Id: O11019
Build Version: 1626347090
Build Host: compiler0184
Build Flavor: full_k62v1_64_bsp-user
Flatform: arm64-v8a
Cpu Abilist: arm64-v8a,armeabi-v7a,armeabi
Cpu Abilist32: armeabi-v7a,armeabi
Cpu Abilist64: arm64-v8a
Board Flatform: mt6765
Boot device: 
Board Flatform Type: mt6765
MT6765
SWVER: unknown
O11019 release-keys
USBType: mtp,adb
Encryption: encrypted
Security mode: 
Modem: MOLY.LR12A.R2.MP.V23.P211
Carrier: 
SimStatus: ABSENT,ABSENT
RF Cal. Date: 
Security Patch Date: 2021-07-01
PDA: 
BOOT: 
CP: MOLY.LR12A.R2.MP.V23.P211
CSC: 
BoardPlatform: 
SN: 
CSC_Sale: 
Build Date: Thu Jul 15 19:04:44 CST 2021
CID: cat: /sys/class/block/mmcblk0/device/cid: Permission denied
Get Memory Info: Filesystem      1K-blocks    Used Available Use% Mounted on
/dev/block/dm-3  24922984 4447092  20443124  18% /data
Get SD Card Info: df: '/storage/sdcard': No such file or directory
df: '/storage/sdcard': No such file or directory
Your Phone Model is: vivo 1820
Your Phone Name is: 1820
Regional: 
Language: 
Clientidbase: 
IMEI: 86251604803xxxx

Done
finished. total time: 0 minutes ~ 13 seconds

Log Backup:

Operation: Runing
Phone Mode: Mediatek Port
UT-Sync Server: OK
Register: OK
Start Modul: OK
___________________________
Power Off ... 
Brom Mode : Press Hold [Vol Up] + [Vol Down]
Please USB Connect... 
 Waiting for Brom Mode...
 CPU: MT6765(Helio P35/G35)
  HW version: 0x0
  WDT: 0x10007000
  CQ_DMA addr: 0x10212000
  Var1: 0x25
 HW code: 0x766
 Target config: 0xe5
  SBC enabled: True
  SLA enabled: False
  DAA enabled: True
  SWJTAG enabled: True
  EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
  Root cert required: False
  Mem read auth: True
  Mem write auth: True
  Cmd 0xC8 blocked: True
  HW subcode: 0x8a00
  HW Ver: 0xca00
  SW Ver: 0x0
 ME_ID: A0D91FEFBAE441DE3932A78EAF55EBCF
 SOC_ID: 19BF03C47BB2E22149441438D4754DEC4AB088C8D02879A5AB7A2425125394AC
 EMMC ID:         QD63MB
 EMMC CID:        150100514436334d42016a3890858635
 EMMC Boot1 Size: 0x400000
 EMMC Boot2 Size: 0x400000
 EMMC GP1 Size:   0x0
 EMMC GP2 Size:   0x0
 EMMC GP3 Size:   0x0
 EMMC GP4 Size:   0x0
 EMMC RPMB Size:  0x1000000
 EMMC USER Size:  0x747c00000
 DA Extensions successfully added
Read gpt finish
Prepairing config...
Exit port...
Reboot the phone...
Please Wait Some Time...
finished. total time: 0 minutes ~ 52 seconds

Operation: Runing
Phone Mode: Mediatek Port
UT-Sync Server: OK
Register: OK
Start Modul: OK
___________________________
Power Off ... 
Brom Mode : Press Hold [Vol Up] + [Vol Down]
Please USB Connect... 
 Waiting for Brom Mode...
 CPU: MT6765(Helio P35/G35)
 EMMC ID:         QD63MB
 EMMC Boot1 Size: 0x400000
 EMMC Boot2 Size: 0x400000
 EMMC RPMB Size:  0x1000000
 EMMC USER Size:  0x747c00000
 DA Extensions successfully added
Reading...0x0000000004108000...0x0000000000080000... nvcfg  done
Reading...0x0000000004108000...0x0000000000080000... nvdata  done
Reading...0x0000000004108000...0x0000000000080000... metadata  done
Reading...0x0000000004108000...0x0000000000080000... nvram  done
Read gpt finish
Prepairing config...
Exit port...
Reboot the phone...
Please Wait Some Time...
finished. total time: 1 minutes ~ 57 seconds

Nvram Vivo Y91i.Selamat mencoba dan semoga sukses

Nvram-Nvdata Vivo Y15 PD1901-Backup Normal

      Comment   
Ketua Teknisi HP (Official)

Nvram-Nvdata Vivo Y15 PD1901-Backup Normal
NVRAM-NVDATA VIVO Y15


Nvram-Nvdata Vivo Y15 PD1901-Backup Normal.File ini kami backup menggunakan Universall Tool,seperti kita tau file nvram berfungsi untuk memperbaiki masalah seperti Baseband Unknown,Sinyal hilang dan permasalahan lain,jika berkenan silahkan unduh...

Info Adb:

Operation: Runing
Phone Mode: Adb Mode
UT-Sync Server: OK
Register: OK
Start Modul: OK
___________________________

Searching Device: OK
Gathering Phone Info: OK
Brand: vivo
Model: vivo 1901
Android Version: 11
Description: full_k62v1_64_bsp-user 11 RP1A.200720.012 eng.compil.20210828.204646 release-keys
Build Id: RP1A.200720.012
Build Version: eng.compil.20210828.204646
Build Host: comsz01078169
Build Flavor: full_k62v1_64_bsp-user
Flatform: arm64-v8a
Cpu Abilist: arm64-v8a,armeabi-v7a,armeabi
Cpu Abilist32: armeabi-v7a,armeabi
Cpu Abilist64: arm64-v8a
Board Flatform: mt6762
Boot device: 
Board Flatform Type: mt6765
SWVER: unknown
RP1A.200720.012 release-keys
USBType: mtp,adb
Encryption: encrypted
Security mode: 
Modem: MOLY.LR12A.R3.MP.V136.6.P35,MOLY.LR12A.R3.MP.V136.6.P35
Carrier: 
SimStatus: ABSENT,ABSENT
RF Cal. Date: 
Security Patch Date: 2021-08-01
PDA: 
BOOT: 
CP: MOLY.LR12A.R3.MP.V136.6.P35,MOLY.LR12A.R3.MP.V136.6.P35
CSC: 
BoardPlatform: 
SN: 
CSC_Sale: 
Build Date: Sat Aug 28 20:42:55 CST 2021
CID: cat: /sys/class/block/mmcblk0/device/cid: Permission denied
Get Memory Info: Filesystem      1K-blocks   Used Available Use% Mounted on
/dev/block/dm-3  53605848 422500  53035892   1% /data/user/0
Get SD Card Info: df: '/storage/sdcard': No such file or directory
df: '/storage/sdcard': No such file or directory
Your Phone Model is: vivo 1901
Your Phone Name is: 1901
Regional: 
Language: 
Clientidbase: 
IMEI: 8609910414xxxxx
Done
finished. total time: 0 minutes ~ 11 seconds

Log Backup:

Operation: Runing
Phone Mode: Mediatek Port
UT-Sync Server: OK
Register: OK
Start Modul: OK
___________________________
Power Off ... 
Brom Mode : Press Hold [Vol Up] + [Vol Down]
Please USB Connect... 
 Waiting for Brom Mode...
 CPU: MT6765(Helio P35/G35)
  HW version: 0x0
  WDT: 0x10007000
  CQ_DMA addr: 0x10212000
  Var1: 0x25
 HW code: 0x766
 Target config: 0xe5
  SBC enabled: True
  SLA enabled: False
  DAA enabled: True
  SWJTAG enabled: True
  EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
  Root cert required: False
  Mem read auth: True
  Mem write auth: True
  Cmd 0xC8 blocked: True
  HW subcode: 0x8a00
  HW Ver: 0xca00
  SW Ver: 0x0
 ME_ID: 66064BB0BB73FF1E1B63D6254D045907
 SOC_ID: 6D42CBF8FFAFE1775A732F85577ACB65BF519F398DE38D3CF56FB0508893E7BD
 EMMC ID:         hC9aP3
 EMMC CID:        90014a6843396150330108a6bcc88677
 EMMC Boot1 Size: 0x400000
 EMMC Boot2 Size: 0x400000
 EMMC GP1 Size:   0x0
 EMMC GP2 Size:   0x0
 EMMC GP3 Size:   0x0
 EMMC GP4 Size:   0x0
 EMMC RPMB Size:  0x1000000
 EMMC USER Size:  0xe8f800000
 DA Extensions successfully added
Reading...0x0000000004108000...0x0000000000080000... nvcfg  done
Reading...0x0000000004108000...0x0000000000080000... nvdata  done
Reading...0x0000000004108000...0x0000000000080000... metadata  done
Reading...0x0000000004108000...0x0000000000080000... nvram  done
Read gpt finish
Prepairing config...
Exit port...
Reboot the phone...
Please Wait Some Time...
finished. total time: 1 minutes ~ 2 seconds

nVRAM y15.Selamat mencoba dan semoga sukses